
**********************************************

Broadcom Avenger Firmware Release 

**********************************************

Release date: 02/10/26

====================== 
Supported Controller:
======================

Avenger 9600-16e
Avenger 9600-8i8e
Avenger 9600-16i
Avenger 9600-24i
Avenger 9600w-16e
Avenger 9620-16i
Avenger 9660-16i
Avenger 9670W-16i
Avenger 9670-24i

Component:
=========
Firmware Release for Avenger Controllers

Version Numbers:	
===============
Current Package Details:
Firmware Package - 8.16.1.0-00000-00011
Firmware - 8.16.1.0-00000-00010
UEFI HII Driver - 08.16.07.00
UEFI BSD Driver - 0x08100400
VisionFW - 05877.0A00_25953.1D00_00151.0200

Previous Package Details:
Firmware Package - 8.15.1.0-00000-00002
Firmware - 8.15.1.0-00000-00001
UEFI HII Driver - 08.15.04.00
UEFI BSD Driver - 0x080F0400
VisionFW - 05877.0A00_50160.0C00_25953.1C00_00151.0100

Release Advisory:
===========================
(1) An online firmware downgrade from 8.7 (or later) to 8.3 or older is not supported. To downgrade to 8.3 or older from 8.7 (or later) will require either an offline activation with a power on reset or a two step downgrade from 8.7 to 8.4 and then to 8.3 or older.
If an online activation or offline with a warm reboot is attempted, the FMC will fault with a boot chain mismatch.

=======================================

(2) Upgrading the firmware to 8.8 and later versions from 8.7 and lower versions will result in an empty "Patrol Read Cycle completed PDs" list being displayed in Applications. Downgrading the firmware from 8.8 and later versions to 8.7 and lower versions will result in an old "Patrol Read Cycle completed PDs" list being displayed in Applications.

=======================================

(3) The event string has been updated for event codes BOOT_LDS_OFFLINE, BOOT_LDS_MISSING and BOOT_LDS_MISSING_SPANS.

Downgrading Firmware from 8.8 or later releases to 8.7 or older releases, results in Enclosure device ID and Physical Disk persistent ID to change. This issue is limited/observed only on systems with virtual enclosures.

=======================================

(4) Vision Firmware upgrade process:

Provide the 'activationtype' option to storcli:
  > storcli2 /c0 download file=<ROP image file name> activationtype=offline

When this command completes successfully, the following message will be displayed:
  ""A Complete Reset is required to activate Component Images.""

The next step is to restart the Host PC. (warm reboot)
Wait at least 5 minutes after the OS boots or attempts to boot.
To activate the new image, a full AC power cycle is now required for eHBA cards. For RAID cards, a DC power cycle is sufficient

========================================

(5) On upgrade to this release from an MR8.3 GCA release or earlier an error event may appear: '613=A transient error has occurred while accessing the flash.'  There are no concerns if this error occurs as this indicates some FDL logged UART log entries may be lost, and the Flash event (PEL) logs may fill with this message.  This does not result in a failure of the FW update or any data integrity issue.  The issue would resolve itself on the next reboot of the firmware by any soft reset or higher level reset.

========================================

(6) "The skipcount field of MPI SCSI IO or JBOD SCSI IO request should not be used for  Non-READ/WRITE commands. Any application, driver, OS or OOB stack sending
non-READ/WRITE commands should not use the SkipCount field of MPI SCSI IO."

========================================

(7) A full OFFLINE activation is required in order to support Host Root Complex PCIe AER recovery feature, a feature which was introduced in 8.6.  if this feature is not required, an online activation may be used.

========================================

(8) The performance of firmware update has been improved by changing when the copying of firmware images from secondary to primary flash locations occurs.  It now occurs after rebooting on new firmware with messaging which indicates image redundancy has been restored.  8.6 and earlier expect (due to the design in those phases) that the image copies occurred prior to the reboot to the new firmware.  So when downgrading from 8.7+ to an earlier phase, once the earlier phase firmware boots, the firmware goes down a repair path when it discovers that secondary and primary do not match.  This results in repair messages being produced by the earlier phase firmware.  These are expected/normal in this scenario.

========================================

(9) The ETP Interface version changed in the 8.12 firmware release.  An online firmware upgrade from 8.11 or earlier firmware to 8.12 or later firmware is not supported.  An MPI complete reset, PCIe reset, or power on reset will be required to activate the new firmware.  Online firmware downgrade is also not supported when downgrading from 8.12+ to 8.11 or older.

========================================

(10) The 8.14 GCA release contains SBR changes.  An online firmware upgrade from 8.13 GCA or earlier firmware is not supported.  An MPI complete reset, PCIe reset, or power on reset will be required to activate the new firmware.  Online firmware downgrade is also not supported when downgrading from 8.14 to earlier releases.

========================================

(11) The 8.15 GCA release contains SBR changes from prior releases.  An online firmware upgrade from prior releases (8.14 or earlier) firmware is not supported.  An MPI complete reset, PCIe reset, or power on reset will be required to activate the new firmware.  Online firmware downgrade is also not supported when downgrading from 8.15 to earlier releases.  
========================================

(12) The 8.16 GCA release contains SBR and RMC changes from prior releases.  An online firmware upgrade from prior releases (8.15 or earlier) firmware is not supported.  An MPI complete reset, PCIe reset, or power on reset will be required to activate the new firmware.  Online firmware downgrade is also not supported when downgrading from 8.16 to earlier releases.

========================================

(13) The 8.16 GCA release contains support for some topologies/enclosures that were supported with 9500 series controllers.  In topologies where the user has connected legacy enclosures that were not previously supported, if a downgrade from 8.16 firmware to a firmware release which does not support legacy enclosures will have the following behaviors:  
       a) If runtime safe mode is not enabled a continuous 0xF003 fault (SYSTEM REBOOT NEEDED) will be encountered.
       b) If runtime safe mode is enabled, the firmware will enter safe mode on reboot.
If this situation is encountered, the legacy enclosure needs to be removed from the topology after which the 8.16 firmware can be downloaded to the controller and the legacy enclosures re-enabled.

Bug Fixes and Enhancements:
===========================
FIRMWARE
DCSG02003883 Firmware faulting with fault 0x84df or 0x8a00 when new logical drives are being added while a function was being shut down
DCSG01972332 Fixed the early return without set or clearing the actual bits in Epak firmware Status
DCSG01949717 Scrub the ctrl info data structure populate bitmap in all modes
DCSG01964589 Add UART - Quick Erase Support
DCSG01966336 PLDM firmware update fails on NVMe drives
DCSG01939562 Device auto assign may overwrite the mapped IOC during state transitions
DCSG01932445 SPDM: Remove Critical Data Exchange Interface with Generic Platform-Specific Abstract Data Exchange
DCSG01986061 Device handles may be allocated within the controller phy range
DCSG01954424 9700-16e controller OOB I2C discovery failed on default address 0x36
DCSG01964597 Adding UART command for Reading Signature Page and Dumping Various Debug
DCSG01998907 Negotiated speed and Capable speed for NVME drive is not correct in RDE
DCSG01941544 nvdata change to enable DMHI support for MF NVME profiles
DCSG01928014 [CLCA] 96xx: Save and dump any fault code encountered during controller reset
DCSG01952833 Fault code 0x8450 when running various RAID levels and copyback during micro write journal playback
DCSG01953096 Update megaraid nightly scheduler script
DCSG01967036 96xx: Disable vendor NAND support in MR8.16
DCSG02004995 SPDM Do not check for PQC bit for versions where it is not a supported algorithm
DCSG01934675 Add new chip rev support for BST
DCSG01984398 Series 97xx: Snapdump delete event missing in eHBA mode
DCSG01980136 [9700 series] Task management IO counter trackers are messed up for dissociated backend and host IOs during FLR
DCSG01968659 96xx: Vendor NAND initialization failed
DCSG01994693 Storage controller port number is displayed incorrectly in BMC GUI application for any non x1 backplane connected
DCSG01951946 Allow for Preventing Connector Port Splitting
DCSG01964003 Series 9700+: Add ETP interface to enable DMHI
DCSG01879209 Multiple VSES devices are not reported to Host
DCSG01984780 Fault 0x1937(e) seen during IO, task management and FLR test
DCSG01933469 NVMe: more debug info for PERST# escalation
DCSG02023461 97xx: Controller hangs in cache offload module after factory repurpose command issued followed by a power cycle
DCSG01964646 Reprovision failure after SID ownership change with enclosure power off
DCSG01980466 [9700 series] Firmware IO context with pure lock release callback cleared during logical drive task management
DCSG01969215 SMART copyback completion but firmware is aborting the copyback
DCSG01990474 Cache Offload Nightly BST failure
DCSG01922494 Update NVME Host handling for Get Features command
DCSG01960354 Fix Static analysis tool issues 1778117 and 1778118
DCSG02000283 Invalid topology detected: Max persistent entries exceeded upon controller soft reset
DCSG01934590 CNSA 2.0 - SPDM: Validate incoming certificate chains using ML-DSA keys
DCSG01929364 Manifest based boot changes (Use manifest image to find SBR and embedded keys)
DCSG01986206 Optimize the Redfish header allowed permission flags in actions
DCSG01989897 Battery Ok RDE event is not logged during boot
DCSG01974156 Pinned Cache for target ID is not displayed even when present
DCSG01972054 Add new status for component image hash not found in manifest data
DCSG01930185 OOBLinfo: reduce Coredump display stack consumption
DCSG01974536 Unable to access zero byte drive from the REST client
DCSG01081200 Add support for new firmware activation delayed failure notification flag
DCSG02000819 [9700 series] Dissociation tracker incorrectly being set on IO whose completion has already been set
DCSG01977796 Cache Offload BST failure on the #1 Nightly BST system
DCSG01947920 Fault 88b4 while running IO and Online Capacity Expansion
DCSG01932393 SATL cache invalidate and clean is not done for data buffer mids used for NCQ version of SCSI log sense sent to SATA drive
DCSG01717036 SPDM: Merge 9600 and 9700 measurement code to common file
DCSG01941177 Add fault prompt to the snapdump prints
DCSG01968741 Populate the value so the correct queue class can be get for IOA_MSG_FUNCTION_FW_TM_IO
DCSG01934556 Series 9600+: Modify firmware redundancy copy to stop when a flash failure is detected
DCSG01687972 Integrate OEM CPLD to be part of release package
DCSG01934595 CNSA 2.0 - FMC: Generate ML-DSA key pair in addition to ECDSA
DCSG01960111 9700 Series: Fault 4309 seen while modifying sas io_unit page
DCSG01954717 Nvme Host Interface: Handle 1MB  Native Nvme IO with  4k unaligned  buffer starting address ( NVME Command PRP1 address)
DCSG01984781 Non Supervisor VM running FLR test failed to boot after few iterations of IO TMs and FLR
DCSG01932067 Running out of NAND resources while running a test case which Flashes Firmware.
DCSG01907722 Added additional debug data of OOB library to coredump OOB section
DCSG01938731 Port 6.79 fwsasmegaapi_mr8 changes to fwsasmegaapi
DCSG02017579 Fix static code analysis issue 1782884
DCSG01941939 Python Script for signing component images using Gen2 signing process.
DCSG01972484 Redfish Storage Controller Resource Serial Number is truncated to 4 bytes
DCSG01933255 9700+ : I2C integrity test: "Set-up time for a repeated START condition" failed on PIC and NVRAM I2C of UBM6 1U_8SFFx1 Backplane
DCSG01973646 Series 9600+: Re-enable OCPR status and switch to 0xD4 address
DCSG01945996 Firmware entered safe mode with critical boot message for offline Volumes  despite of Volumes s getting auto imported at bootup
DCSG01962443 SID ownership events related to ownership are incomplete
DCSG01991715 Measurement all should not be returning more than what platform support
DCSG01937153 OOB Dev BST: OOB Dev BST enhancements
DCSG01958195 RDE Reset all operation doesn't clear all the config
DCSG01978702 Review MUR related log levels
DCSG01933020 97xx NVMe: E61B fault on certain drive or backplane malfunction
DCSG01936265 Fault 060E fault observed on Linux
DCSG01936887 Enable FIPS compliance enhancements for 97xx series of controllers
DCSG01942591 Fault Code 0x8b1b
DCSG01160734 HII Manage PCIe Storage Interface page is showing incorrect receptacle name.
DCSG02010029 Validation of Raid Physical Drive SmartMode for Feature HBA
DCSG01984122 SPDM Lib: APIs to peer firmware Additional fixes reported after intergration
DCSG01954606 [9700 series] RSGL resource leak with IO and Task Management on Degraded Parity RAID logical drives
DCSG01942171 PL Fault 0xEE10 seen while running locate command
DCSG01932758 97xx NVMe: E612 fault with malfunctioning drive and host resets
DCSG02000830 Fault 0x8b90 hit while doing physical disk removal - insertion test and foreign import on RAID 6 Virtual Disk undergoing rebuild on both the arms with auto-rebuild enabled
DCSG01965080 Update OEM HBICs 8.16 Initial Release
DCSG01963287 Port 6.82 fwsasmegaapi_mr8 changes to fwsasmegaapi
DCSG01933223 Persist Snapdump downloaded bitmap across resets
DCSG01945557 Cache Manager Debug Improvements - Part 1
DCSG01961850 ooblib:Invalidate the request retry timer id upon expiration
DCSG01968598 Apply the Auto Assign for Firmware upgrade and Fresh Boot
DCSG01977254 Fault 0x8a27
DCSG01968885 Fault Code 0x8b17 : Received Opcode=TRM_MSG_ERROR_CACHE_SCAN, Lmid=0x4320
DCSG01953082 Out of timers condition with too many hashing internal IOs
DCSG01934820 96xx Boards: ASSERT: Fault 0x87c7 hit during delete configuration
DCSG01939583 API to fetch the dev handle from the persistent id returns success even though the mapping dev handle is Invalid
DCSG01957015 Remove unused parameter from FMAPI INITIATOR interface structure
DCSG01977747 Remove the device id in NVMe interface API
DCSG01944714 SPDM Key Exchange did not succeed when Mutual Authentication bit was set in the capabilites
DCSG01962504 Firmware:  improve handling of enclosure broadcast events
DCSG01933993 Validate and persist to MPB ML-DSA-87 (PQC) device keys used for board Provisioning
DCSG01964981 Update release order package content BST list of supported boards for channel 97xx
DCSG01952873 Series 9700+: Host station is being populated with downstream address traps
DCSG01900360 97xx DDR: Create separate IRC Elog
DCSG01931196 97xx: Add cache offload test cases related to correctable/uncorrectable ECC error injection into IRC
DCSG01937409 97xx  Code coverage improvement for Backup energy module
DCSG01946109 NVMe: E619 fault on PERST# escalation if VSES queue is full
DCSG01964591 NVMe: fix static analysis issues
DCSG02000816 Block the controller firmware Downgrade if the trombone enclosure is connected to controller.
DCSG01971071 Firmware fault during task management
DCSG01946350 REST client incorrectly displays the optimum IO size for a RAID5 volume consists of 20 drives
DCSG01952804 Update build script to allow maximum 16 hash entries
DCSG01940284 Changes are made in ring buffer decoder to compute trace size excluding the number of bytes interleaved before a valid trace entry is found in case buffer is unwrapped
DCSG01972462 97xx: Event '359' for battery failure is getting generated multiple times
DCSG01974202 RingBufeer and TraceBuffer is flooded with the device discovery resources allocation traces.
DCSG01935323 Creating a file system with volume mapped to NVMe function takes a very long time
DCSG01966963 Add fixes for security audit findings
DCSG01946556 Add StringTable.bin to the firmware build
DCSG01960165 NVMe host hits firmware error: Fault=0x265d every time during reboot after mapped all SED Logical Disks to nvme profile
DCSG01976484 Add debug info when decrypting Secure Page 1 to indicate source lib of keys
DCSG01991764 memset of context data was over shooting the size
DCSG01952201 Nvdata Add Partials to code for eHBA for OEM
DCSG01994816 For drive interim states RDE events are logged
DCSG01981522 265C During IO with Task Management ,Medium Error and Background operations
DCSG01978482 SED JBODs fails to reprovision during enclosure power off after SID Ownership change requested to Firmware
DCSG01872415 97xxx MF to Implement the DMHI Support.
DCSG01941971 9700 Series: Firmware UART is flooded with "CheckMap FALSE" prints causing RingBuffer and other useful data to overflow
DCSG01951795 Firmware Shows Incorrect Phase Number
DCSG01928594 Fault 1937e observed while running IO and FLR  test
DCSG01953671 Infinidat-PL-Firmware: Task management support for managed switch SES device
DCSG01943829 Add the state transition checking in device hidden ack process and update the device removal timer before the map deleted
DCSG01942160 Fault 265D seen while running locate all on Infinidat setup
DCSG01937093 Firmware faults with 0x1937 0xE fault while processing unmap and target reset task management on the same virtual drive
DCSG01928551 SATL layer device testing for future product
DCSG02000786 SPDM Implement Non-Critical Certificate Extension OID section along with the Hardware identity OID.
DCSG01935004 FMC-CDI to use SHA2-512 instead of SHA3-512
DCSG01934598 CNSA 2.0 - FMC: Make ML-DSA key pair available to SMM
DCSG01077253 NVMe Host Controller Shutdown Verification
DCSG01956615 Port 6.81 fwsasmegaapi_mr8 changes to fwsasmegaapi
DCSG01928007 97xx: Optimize Snapdump Get requests
DCSG01992604 RDE event not logged for pel event
DCSG01940138 0618 Fault found on Esxi Virtualization environment
DCSG01956780 Update manifest data to use secure boot image hash
DCSG01993720 When user executes ResetToDefaults "PreserveVolumes" using REST client, the operation fails with Unsupported Operation.
DCSG01966313 After Factory repurpose and Powercycle - System halted due to SPDM Component Authentication failure with SPDM error
DCSG01939310 Fixed extended status test failing due to timing constraints from firmware side
DCSG01949649 Degraded Parity with copyback and Medium Error Handling
DCSG01934726 Bring up 9700-16e Board
DCSG01964978 NVMe Host: FaultCode 0x265c when delete config
DCSG01970496 AV Release Build Automation:Update shell scripts
DCSG01934574 Remove validating the mbox.b[4] while setting the auto assignment policy
DCSG01965588 Fault 6003 observed while doing locate on/off on Managed Switch SES
DCSG01964161 nvmehost: Host IO failure on nvmedisk, as size reported "0" in OS layer after few hours but App reported correctly as per user size created
DCSG01962304 Tune handling  of concurrent task management requests
DCSG01984569 Enable Enclosure compatibility with the HBA465e
DCSG01956216 Improved code coverage for Backup Energy Management module
DCSG01980166 [9700 series] Command block can take more time due to medium error recovery
DCSG01909608 Regain PCI link width when cable is restored
DCSG01971637 Support Battery Metrics
DCSG01936936 Build failure due to variable KeyLen
DCSG01946448 Reduced Backup Energy Management module test cases execution time
DCSG02001708 Enclosure ID is changing to Invalid ID
DCSG01974190 For host boot, memory is not allocated but populating the structure data
DCSG01931907 firmware fault during medium error recovery
DCSG01934592 CNSA 2.0 - SPDM: Perform SPDM attestation using ML-DSA keys (GET DIGESTS, GET CERTIFICATE, and CHALLENGE)
DCSG01936052 Controller fault 8210 observed while running IO TMs and FLR test
DCSG01936027 The Measurement request with Request Attribute value set to 1 is failing
DCSG01937467 cosBst9700-i2 failing for key errors at boot.
DCSG01971804 Flashing Firmware using host boot method, a false positive boot message is reported
DCSG01957430 96xx : Supercap in Critical status even after replacing a new Supercap
DCSG01935174 MegaRAID Firmware Changes to Support Concise Evidence Generation
DCSG01970450 SPDM changes to support application interface for information for multiple slot groups
DCSG01967727 Uninitialized scaler variable
DCSG01966891 RDE Storage link is not accessible after setting Autoconfig Primary parameter to any of the secure options
DCSG01952870 NVMe: option to fault on drive temperature warning
DCSG01968292 96xx+: OOB I2C timeout values are wrong
DCSG01973643 Compilation failure when NVME_HOSTINTF_SUPPORT is turned off.
DCSG01938079 Series 97xx:  Files in Snapdump are missing due to 265D recursive fault
DCSG02015201 Added Release Advisory for offline activation requirement for vision Release Order
DCSG01942036 Controller fault 0312 observed while running SPDM attestation test
DCSG01957210 CNSA 2.0 - Wolf library settings and customization to support SPDM CNSA2.0 provisioning (Part 2)
DCSG01929767 Need a generalized nightly development test for 9700 series eHBA
DCSG01936322 REST client reports incorrect controller port number for the drives connected behind a UBM10 backplane
DCSG01934635 While using "pel genereateTestEvent" several discrepancies seen
DCSG01933005 The 'Drive firmware' update events are not logging correctly if a drive reset happens during the microcode update.
DCSG01942937 Redundant drive certification status events seen after drive erase operation
DCSG01933589 NVDATA Changes between current and previous program
DCSG01954483 [9700 series] Firmware fault due to stale values in dissociated IO tracker
DCSG01945828 Fault 6d05 observed on SATA topology when NAK CRC error is generated and transport layer retry logic is enabled.
DCSG01929970 dedicated spare drives converting to global spare during firmware update
DCSG01979898 Firmware is allowing reprovision on Unusable foreign drives (SID Ownership) and drives are moving to failed state when configuration is created on it
DCSG01921148 NVMe host identify cmd enhancements - Mandatory CNS support
DCSG02007235 change the log Info code
DCSG01889818 Safestore: Concurrent FDE command retry handling
DCSG01971277 Fix Flash Filesystem Debug Output
DCSG01949941 97xx: use correct message flags in NVMe encapsulated structure
DCSG01974176 Clear the "blinkProgress" bit while aborting all enclousure wait Q jobs
DCSG01944960 SMM fault observed at bootup with secure boot disabled
DCSG01981200 Firmware fault during task management
DCSG01942987 Develop a configurable switch to enable users to retain the tty log buffer pointer settings when executing the 'set factory default' command
DCSG01954403 97xx : PSoC log data has wrong endianness if UART logging is off
DCSG01937323 MR8_REF in MR8_KEK_HMAC_KEY_INFO structure is not updated during MR8_DCMD_CTRL_KEK_HMAC_KEY_INFO_GET request
DCSG01968280 Pinned write jounral playback and the drives are removed during that firmware faults
DCSG01957842 Series 9600+: Uninitialized stack variable
DCSG02010976 Updates for dual signing and deployment for 97xx boards
DCSG01957144 Updated the BEJ property length as per RDE library changes
DCSG01923630 96xx: Add cache offload BST test cases to exercise NAND error injection scenarios
DCSG01957235 CNSA 2.0 - SPDM: certificate signing request generation ML-DSA keys
DCSG01957955 telnet connection failing on newer version of apc
DCSG01872606 96xx: Block firmware update to version that does not support vendor NAND
DCSG01931393 Add secure boot hash verification function for manifest based boot
DCSG01965895 97xx: NAND read retry algorithm optimization
DCSG01932567 Provide a mechanism to forward SPID and DPID of a request message received over a Fabric port to CCI layer
DCSG01940869 Skip NVMe wake up and shutdown requests for 9705 series storage controllers
DCSG01968333 Remove unreachable code in SPDM version check that was found with code analysis tool
DCSG02015588 The subject name data is not populated in the certificate signing request in some cases.
DCSG01932452 Series 97xx: Snapdump logging failing at NvmeQCfgTbl
DCSG01934686 SBLIB: Add routine to get encrypted hash entry header that is associated with the OTP secure boot key
DCSG02021115 Customer specific Supported Bitmap Population for maxLDs Controller Property
DCSG02011081 RAID1E with multiple spans : uncorrectable medium error on non zero span event logs related to bad block management are incorrect
DCSG01999852 SPDM Implement Non-Critical Certificate Extension OID section along with the Hardware identity OID.
DCSG01935481 Add debug flag to disable profile change
DCSG01946017 Add CRC flag in hash operation input
DCSG01946561 Code analysis found missed bounds checking
DCSG01934191 Fault 0x6216 seen during IO Task Management and FLR on SATA drive
DCSG01958064 Firmware image built with script genfwpkg.py from release order fails validation due to sha3
DCSG01970065 97xx Series: Failed to enable controller security with external key binding via Redfish
DCSG01968890 Host IO in unexpected state after backend io is aborted during medium error recovery
DCSG01956237 97xx: Fixed Battery Energy Management  Release order package test case replace test firmware immediately after test case
DCSG01971225 DC observed while running IO and JBOF power cycles
DCSG01986108 ASSERT hit during IO run and task management on RAID volume
DCSG02010479 SPDM - X509 Extension non-critical section for hardware id needs to be DER format.
DCSG01967182 Foreign import preview fails with error message error MaxValue 16, TryValue 24
DCSG01859707 MF Reliability Requirements- eHBA mode
DCSG01976812 Static code analysis issue CID 1781005
DCSG01972864 97xx : Update BST to use correct command to simulate bad epack
DCSG01968582 RDE - "EncryptionStatus" of Self Encrypting Drive is reported incorrectly in REST client
DCSG01983725 Missing break statement
DCSG01969359 Abort back end IO's when drive encounters hot plug reset failure
DCSG02013910 Third party software audit provider - Missing Deallocation of MPI in SPDM ECC Sign
DCSG02006346 Peer Certificate Chain Validation Fails Randomly Due to Loop Overrun
DCSG01949448 Series 9600+: Add OCPR Status Capability
DCSG01928460 NVMe: test code to delay NVMe drive ready
DCSG01928948 Degraded Parity Volume bad block handling during micro write journal playback
DCSG01995732 ooblib:MCTP message type 0x06 is not reported as part of Get Message Type Support command
DCSG01957563 SBLIB: Add expected wolf release value as a define
DCSG01910587 During Soft Reset and Controller Shutdown testing the controller occasionally becomes unresponsive.
DCSG01970422 Firmware faults with 0x88e6 when NVMe jbod gives backend sense errors when firmware is processing scatter gather divert IOs
DCSG01929911 9700: NVMe IO pended forever in Hardware pendQ and causes Fault 0x8b32
DCSG01962527 9600-8i8e enable x8 wide port support on the external connectors
DCSG01872605 96xx: Implement new vendor NAND support for cache offload feature
DCSG01931195 Alleviate an 0xECA8 fault that occurs occasionally in delivery BST
DCSG01968745 PLDM firmware update on the OEM specific storage controller is taking longer time
DCSG01954303 Parity Degraded Porting Error
DCSG01571033 Enable handling for missing MPB
DCSG01936744 Foreign drive is shown in HotspareType@Redfish.AllowableValues
DCSG01940104 consolidate firmware that determines the maximum number of Snapdumps removing the duplicate firmware
DCSG02009441 Allow the Certificate non-critical extensions for all 96xx products
DCSG01968293 PLDM firmware update on UBM backplane fails when more than 20 drives connected to the controller
DCSG01953989 Storcli show command shows 88 Physical Disk, whereas overall Physical Disks in the enclosure are 84 only and also Physical Disk count shows 89 Physical Disks & Physical Disk drive count 
DCSG01940082 Series 9700: Ensure stack variable is initialized for debug path
DCSG01942855 9700+ : Add support yield CPU when downloading ondemand Segmented Trace buffer from Host
DCSG01975343 Firmware fault during IO with Task management script running
DCSG01954239 H365i Front controller shows Fault after import the Volumes
DCSG01987100 Fault 8479
DCSG01979336 Recursive 0x265d fault during PAGE 19 read from scrutiny on Profile (0,2)
DCSG02010328 Increase the size of SPDM_CONFIG_MAX_CERTIFICATE_CHAIN_DER_LEN
DCSG01956838 CBB fault 0x3a at bootup
DCSG01947986 Report each NVMe Controller as a different Subsystem
DCSG02023629 FMC needs to set the Manifest image's max size to no larger than 64K for 9600 and 9700
DCSG01974177 0x265d fault occurs during foreign config read
DCSG01944130 NVMe Host: FaultCode 0x8698 when run different background  operations
DCSG01978993 AV Release Build Automation:Keep case sensitivity same on manual and auto image build
DCSG01966317 SPDM : When HANDSHAKE_IN_THE_CLEAR_CAP is set to zero secure session is failing.
DCSG01971129 Firmware encountered fault while running the serial BST
DCSG01976887 NVMe: Write Buffer fails if BUFFER OFFSET is 0x40000 or larger
DCSG01956618 Redundant message is observed in UART log when device driver is loading
DCSG01963307 97xx - NVMehost: Fault 8260 Cache offload failed
DCSG02009898 RAID1E with medium error and micro write journals causing firmware to not finisih the playback
DCSG01938473 97xx: SKU Management related events are not configured properly
DCSG01979314 ASSERT:  0x8482 SSys 0x5 Data TRM error - Needs Handling seen during Ios+rebuild+FLR
DCSG01956372 Firmware Upgrade with MLDSA Key update failed
DCSG01933418 Re-enable multi function support for all OEM boards
DCSG01968681 H965e MD2460 max config hitting persistent ID collision
DCSG01999703 One of the x1 backplanes is not being listed in the BMC when PLDM firmware initiation is attempted on a system with three UBM3/6 x1 backplanes connected
DCSG02021501 Fault is observed during ondemand snapdump generation
DCSG01999781 Snapdump not printing MPI Host Q entries
DCSG02007016 Peer controller SPDM: Memory Leak Fix Post Peer Certificate Chain and Signature Validation
DCSG02009247 Firmware activation was not able to proceed due to a non supervisor shutdown was in progress
DCSG01978083 SIT automation: files doesnt zip the RAID nvdata files
DCSG01941305 Series 97xx: Snapdump log collects only 2 RTT logs.
DCSG01834601 Setup the 97xx raid runner file to run tests for both channel and OEM controllers
DCSG01836220 Design and implement Error Handling for MCTP Type7 (FM API) Initiator
DCSG01917927 Update NVDATA for 9760W-32E3 board
DCSG01935300 MPI 3.0: Header file changes for MPI3 revision 37 Interim Release 1
DCSG02000441 Enable SEP device exposed behind RAID controller
DCSG01970159 Series 9600+: Disable OCPR status
DCSG01953924 Improving the time it takes to run the serial delivery BST
DCSG01970516 SPDM Library: Concise Evidence Support in CBOR Format
DCSG01967590 Integrate Supercap MCU Firmware Version 0x17
DCSG01996394 Review NVDATA settings between current and previous program
DCSG01942820 RDE - POST operation volume initialization fails from REST client when the volume count goes beyond 63
DCSG01940063 Target mode code improvements
DCSG01971436 Firmware faulted with FAULT: 1988 upon reinserting secured JBOD and moving to Ugood
DCSG01964014 [9700 series] Medium Error Region Lock counter decrement for incorrect IO due to Lmid contents being changed
DCSG01970557 SBLIB: NULL pointer is incorrectly used during digest verify for measurment
DCSG01940091 Incorrect controller uart print observed while doing OCPR key corrupt PLDM firmware image download
DCSG01948349 print fixes
DCSG01967232 ASSERT due to Task reset timeout
DCSG01969051 Port 6.83 fwsasmegaapi_mr8 changes to fwsasmegaapi
DCSG01967448 Host Controlled Boot firmware download fails on recovery with CDI firmware
DCSG01902222 Fault Code 0x8479
DCSG02013997 Failed to change local to external encryption mode using Redfish
DCSG01959005 SMM and Fmc not updating fault bits on all functions
DCSG01973547 ASSERT: File gen4fw\raid\src\raidFwMain.c line 2210 Fault Code 0x8b25 SSys 0xa Data Unhandled HCU completion Mid:0x3108
DCSG01972146 Raid type is listing as RAID1 for RAID10 in Redfish and not allowing creation of R10 via REST client.
DCSG01974149 Redfish header Allow method does not match to actual support methods
DCSG01980170 ASSERT: File raidSglErrorMgmt.c line 2696 Fault Code 0x881b SSys 0x4 Data SglAddress Cannot be NULL
DCSG01957406 PEX90000_OOBLIB: Fix issue in fmapi module reported by static Analysis tool
DCSG02017757 Certificate Signing Request failing because of missing z coordinate in the key pair
DCSG01961709 Controller fault 265D observed while updating firmware image built with PKL44
DCSG01936024 Incorrect State transition events sequence during Dedicated Hotspare foreign import
DCSG01944318 When there are only foreign drives in the controller, If tried to set SID ownership from Firmware to MSID it fails
DCSG01960099 Snapdump TTY missing prints during controlled shutdown
DCSG01922783 Fabric Crawl out - Support for more than one fabric port
DCSG01941252 BST fails with wrong credentials
DCSG01984104 97xx: Update epak VPD structure to handle Warn Temp bit reads for FBU33
DCSG01952947 Need to correctly handle Micro Write Journaling replay on parity Virtual Disks for IO block range is less than 16 with non zero offset and cross Arm/Strip boundary
DCSG01934584 CNSA 2.0 - SPDM: Request and process ML-DSA key pair from SMM in addition to ECDSA key pair
DCSG01969397 With corrupted App, BIOS takes a long time to boot to EFI
DCSG01952994 Controller security set action operation is failed from REST client
DCSG01956646 [9700 series] Incorrect Parity RAID Write Policy change with outstanding Flush Rows request
DCSG01954465 9700-16e controller drive discovery failed after expander hot remove add
DCSG01935178 Series 9600+: Integrate SPILIB2 20.00.48 into firmware
DCSG01951111 PI CI values debug dump periodically
DCSG01965771 Firmware encountered fault code 8109 while clean flashing the 97XX firmware
DCSG01939288 Added logs to catch corner case failure with more debug info for change count test
DCSG01930144 Code Analysis issue:Raid (skip count ) module
DCSG01939566 Implemented RDE battery support
DCSG01949508 SPDM Key Exchange did not succeed when Mutual Authentication bit was set in the capabilites
DCSG01943503 Run secure boot library BST
DCSG01933201 Verified independent firmware build with and without psoc logging enabled also cleaned up unused static variables
DCSG01964584 Remove IOP UART commands for displaying the Persistent RB and TTY
DCSG01901125 Review and update the offsets when a DCMD is failed with MR8_DCMD_STAT_INVALID_PARAMETER
DCSG01958142 Updating Man page 40 doesn't get reflect without set factory defaults
DCSG01928552 Restore device associated to an IOC map information when switching from single function profile to multi-function profile
DCSG01937983 97xx : Nightly BST failure
DCSG01956148 Events handling for logical drive counters
DCSG01945250 9700 Board Energy Manager:26a6 fault
DCSG01984502 Unable to access the drive present in Bay 9 behind the UBM10/11 backplanes
DCSG01966906 UART is getting flooded with the prints "[ENCL0] INFO: Encl Smart: physical disk 14f PowerOnHours 1068 PL value 98d80300"
DCSG01876123 Namespace EUI64 and NGUID fields with Physical Disk EUI64 and NGUID for JBOD.
DCSG01926315 Hardware error interrupt during medium error recovery due to offline arm being set in rebuild request to hardware
DCSG01954179 A script to upload the host diagnostic buffers
DCSG01952716 Disable MF - NVMe EEDP Support with MPI MF
DCSG01956373 Firmware download with Dual-Key PKL fails
DCSG01933848 Eliminate CCR reg duplicates - Part 1
DCSG01468138 Firmware fault handling for NVMe host interface
DCSG01970274 9800: Update SBLIB that has fix for NULL pointer incorrectly used during digest verify for measurment
DCSG01934007 Firmware faulted with FAULT: 265D during creation of 64 R0 virtual disks
DCSG01962261 firmware fault during consistency check and medium error
DCSG01948425 SATL:Testing of the new vendor CDL HDDs
DCSG01939044 Fault 0x873B seen during writesame stress exceptions
DCSG01933199 Firmware faults with 0x6004 during InlineHashing and IO TaskManagement test
DCSG01941091 Fault 0xF000 observed during IOs with exceptions and the FLRs
DCSG01956989 Fault 0x89F0/265D during immediate auto-assign
DCSG01946050 controllers allowing to set autoassign policy to "Unassigned" when device assignment is supported only for supervisor
DCSG01934660 9700 Series NVMe Host IF: Establish NVMe CIT
DCSG01954833 Added new BST tests and code coverage fixes
DCSG01900806 Unable to create enhanced snapdump after 33 SDs in Ehba Profile
DCSG01953321 Security key and key id is getting printed to the UART
DCSG01946580 Improving the time it takes to run the serial delivery BST
DCSG02006183 96xx: Cache offload BST script failed due to response not returned for debug command sent to controller
DCSG01942998 SPDM self-test failed
DCSG01969034 97xx : learn cycle failed, possibly ROC-PSOC communication error
DCSG01965532 WriteHoleProtectionPolicy property is displayed for non supported volumes
DCSG01956947 AV Release Build Automation:Build jenkins pipeline to kick off builds
DCSG01945144 Repeated same drive JBOD creation is successful from RDE client
DCSG01967372 Add NVME Host uart print enable/disable capability
DCSG01981553 Fix static analysis issue in the shutdown code
DCSG01975226 Foreign import preview of logical drive with read ahead current cache policy in eHBA personality
DCSG01937620 ReadCapacity10 failure on low capacity drives
DCSG01984717 96xx Boards: Fault 265D while running SES commands and Task Management to SES devices attached to OEM JBODs
DCSG01931160 97xx: Enabling the UART for command/response is causing certain debug commands to fail in cache offload BST
DCSG02006252 After reboot the host the nvcache is going to bad state
DCSG01949200 Legacy enclosure mode: Solution delivery
DCSG01946512 97xx : Incomplete RMC log during DC power cycle.
DCSG01986131 EMM 1 Failed AEN generated on server hardreset
DCSG01942468 96xx : BST fails for the two write same test cases
DCSG01999193 Firmware not completing Function level reset
DCSG01977296 Solidigm NVMe drive state change to Unusable with drive hotplug on an UBM BP
DCSG01957855 update the copy back active flag in the command block context
DCSG01939789 Series 9700: When power-on-sense HostWidth is set to x8 the board fails to boot
DCSG01989056 SES slot element updates being applied persistently after configured drive removed or when SWAP bit set
DCSG01581178 Controller property Advance Host SES management disablement doesn't take effect
DCSG01956147 Inline hashing issue propagating unit attention to host
DCSG01953482 Micro Write Journal Remove not needed code that sets buffered read device property
DCSG01951453 Bypass firmware fault for the bus master disabled error if the endpoint in d3hot state.
DCSG01958311 B0: Hit ASSERT: File gen4fw\raid\src\raidFwMain.c line 6636 fault code 0x3e SSys 0xa Data During Mode 0 Flash from A0 to B0
DCSG01967258 OOBlib baseline to be updated to latest
DCSG01917565 Jenkins BST Support: Add pipeline and nodes to support customer specific BST
DCSG01968135 genFwPkg.py incorrectly re-signing an image
DCSG02015598 Disable MCU Logging
DCSG01945098 Count of numSges exceeds firmware limits, leading to firmware assertion
DCSG01968883 Auto rebuild is not getting started when removed drive is inserted back
DCSG01934611 97XX series, NVMe host interface mode, identify controller command should return buffer requirements only on NVMe supervisor function.
DCSG01973630 SPDM changes to support application interface for information for multiple slot groups
DCSG01990024 ASSERT hit during IO run and issue task management test
DCSG01941962 Align OEM nvdata settings of current and previous generations
DCSG01974789 97xx: Code issue in cache offload read-retry module detected by static analysis tool
DCSG02019307 RAID 1E with bad block management full, identifying the arm to perform puncture
DCSG01970588 Fault F000 RC:8 seen while running FLR test along with PHY resets
DCSG01943525 Series 96xx: add more controllers to the test suite
DCSG01858082 Clear superCap Warning after successful learn cycle for superCap predictive failure
DCSG01972108 [9700 series] Internal IO incrementing IO trackers meant for host IOs during medium error recovery
DCSG02019048 Series 97xx: Controller is stuck at DDR SPD i2c read during reboot test
DCSG01963661 CNSA 2.0 - SPDM: Perform SPDM attestation using ML-DSA keys (GET DIGESTS, GET CERTIFICATE, and CHALLENGE)
DCSG02017728 Back out peer controller related changes from spdm library DCSG02011728
DCSG01976480 Failure in Snapdump while logging CacheOffload.txt for a 0x1306 fault
DCSG01956784 97xx : PSoC logging stops early after bootup
DCSG01983573 SPDM reading certificate for slotgroup=1 and slot=0 causes a fault.
DCSG01930266 Importable foreign configuration becomes non-importable when Firmware is updated from Secured DHP disabled to enabled one
DCSG01966296 Fault 0x89ef during insertion after rekey with local key management from customer utility
DCSG01945678 Hit Faultcode 87c0 during copyback/Rebuild/consistency check & "On Capacity Expansion" on R6
DCSG01933692 Controller reset required APIs in IOP is obsolete as it is replaced by MRI APIs hence removed it
DCSG01934612 Firmware fault with task management and copy back
DCSG01932006 Fix load address checks in ComponentImageCheck routine
DCSG01955990 firmware fault during FLR test
DCSG01925800 96xx Boards: Patrol Read scheduled properties gets reset after powering off the the server and bring it back up with time gap.
DCSG01963840 Series 96xx: DDR correctable error injection failing in automated testing
DCSG01955994 IPMI power command failed
DCSG01946444 Generate physical device association event when a device is mapped to the physical function
DCSG01956350 Request to unblock vendor specific NVMe command (0xC0 - 0xC5) to get SSD logs
DCSG01939350 Firmware is reporting multiple debug prints referring to "FIX: prev this would have been allowed" after destaging cache
DCSG01944056 FMC-CDI to use SHA2-512 instead of SHA3-512
DCSG01950696 Config page access error messages dumped in UART
DCSG01890171 Deliver MPI 3.00.38 changes over prior release
DCSG02009715 Error message observed while changing the Auto-assign policy(execute once) option when NO JBODs available
DCSG01875816 Nvsram secure Erase flags refactor
DCSG01971698 Firmware Fault for R6 array creation
DCSG01965296 Fixed automatic system disconnection over ssh upon errors
DCSG01934822 Firmware faulted with Fault code E412 after online controller reset initiated firmware boot
DCSG01950409 Device initialization state machine
DCSG01935478 Partition failed on JBOD NVME drives in Windows
DCSG01938790 SPDM self-test failed
DCSG01859346 Correct firmware and applications to show and log meaningful SuperCap temperature
DCSG01934589 CNSA 2.0 - SPDM: certificate signing request generation ML-DSA keys
DCSG01942609 97xx: Cache restore failure seen after updating firmware to a version that does not support DIS inversion feature
DCSG01942627 Firmware upgrade is going through even when SID credential management ownership change is pending
DCSG02016510 Fix BIOS max size during validation
DCSG01966788 Firmware faults with 0xf000 as the command block for pinned cache foreign import doesn't complete in time
DCSG01964882 Added more debug info upon failure for EPAK predictive failure test case
DCSG01943976 Fix the 9700-16e BoardName and ChipName in NVDATA
DCSG01966285 Observing the log entry "[OOB0] DBG: PLDMRDE: [BejEnc] Unhandled bejValue for Type 0x6 location 2" repeatedly in UART on OEM tip code - OOB Code changes
DCSG01973094 Block 'Legacy enclosure mode feature' Incompatible firmware update.
DCSG01963226 OOB Common Library: Add support to fecilitate Drive and Environment Metrics Schemas
DCSG01986626 Firmware fault during task management
DCSG01913948 97xx NVMe Host : Setup NVMe 2.0 Compliance tool and fix defects
DCSG01984609 9700: Align all PerformanceIT profiles to disable enclosure services in ManPage40
DCSG02006203 Package manifest measurement index was not yet defined in the firmware code
DCSG01928461 ML-DSA key is incorrectly shown in storcli show securebootinfo output instead of RSA key
DCSG01966516 Resource Leak leading to firmware fault
DCSG01946521 Port 6.80 fwsasmegaapi_mr8 changes to fwsasmegaapi
DCSG01872465 NVMe Host : Review / Fix issues with MPI status to NVMe Status mapping
DCSG01947459 97xx Snapdump: fix bad pointer when creating RaidError.txt
DCSG01942955 PL NVMe: update to  SCSI to NVMe translation 1.20 spec.
DCSG01930191 Max SAS/SATA Drives =32  shown for OEM Controller
DCSG01996553 Observed "SCSI Device ModeSense Failures and Format Corruption Warnings " on ESXI9.0 OS after boot
DCSG02005933 [9700 series] IOs in ActiveList stored in medium error Lmid context are not being aborted during logical drive task management
DCSG01942635 Unmap or write same feature is not enabled on the controller
DCSG01944544 Firmware is faulting with 0x6011 while running InlineHashing, Task management and destructive domain test on future product.
DCSG01878368 Support for a new Transport Binding  type for Fabric port in ooblib
DCSG01989704 SED KEY ID GET Improvements
DCSG01970224 Series 9600+: Block downgrade if firmware is using new MRAM
DCSG01942779 Space is showed as Allowable Pattern for EncryptionKeyIdentifier,
DCSG01941729 Fault 0x8402 seen with IO-TMs and writesame stress
DCSG01972402 [9700 series] Reset Lmid fields before retrying partial cache hit IOs
DCSG02015457 RDE - Maximum number of volumes reported is lesser than the number of volumes under VolumeCollection resource
DCSG01993673 UNSTABLE event should be logged while changing enclosure operational state from initialization  to FAILED
DCSG02000489 PL Firmware: Fault 4858 on cable toggling between 2 enclosures
DCSG01983581 IOM handles were not added, but corresponding drive paths are discovered after expander reset tests
DCSG01966953 SBLIB: Measurements and the hash algorithim are not saved during authentication
DCSG01969405 SMM: Add secure request to get SBLIB's image measurement hash algorithm
DCSG01936237 CTRL Info is showing stripe size 64k and 256k for HDDs as supported for 9700 series
DCSG01995682 /ex show all is listing out all the slots status on each enclosure.
DCSG01946650 Drive and Environment Metrics Integration ER
DCSG01957837 Performance dip seen while running 16 NVME direct attached SSD
DCSG01944441 Secured Nonraid Physical Disks are no longer mapped to assigned function after they are unlocked
DCSG01972956 Multiple battery failure RDE event is observed for energy pack failure
DCSG01957893 Reprovision operation fails on certain drives
DCSG01966067 Bring up NVMe Host IF with native windows StorMQ Driver
DCSG01962653 Align OEM nvdata settings of current and previous generations
DCSG01931163 97xx: Flash controller hangs after read retry command sequence is issued to vendor NAND
DCSG01939765 Firmware fails to manually unassign/assign volumes to function on B0 controller but works with an A0 controller
DCSG01960499 Unblock SCSI Passthrough commands 0xE6 and 0xF7
DCSG01962182 There is a FMC fault when firmware is set for CDI to generate key pair
DCSG01996302 Firmware faults with 0x6001 while running unaligned IO with Task Management on JBODs.
DCSG01890168 MPI 3.0: Header file changes for MPI3 revision 38
DCSG01983200 H965e crashed while deleting RAID volumes with snapdump"FaultCode 0xf000"
DCSG01951481 Implement energy pack numeric sensor
DCSG01945994 Host boot failure with forced fault in firmware
DCSG01932344 Modify the contoller info bitmap default values
DCSG02021481 97xx Series: Regression Error occurred while retrieving Controller information in HII
DCSG01964501 97xx: Backup Energy Module Code analysis tool bugs fixed
DCSG01934793 OOBLib intergration failure
DCSG02009028 [9700 series] Auto flush Lmid is incorrectly being evaluated for dissociation
DCSG01948384 Fix issues identified in spdm BST testing
DCSG01966440 Enable alternate boot chain retry logic
DCSG01942761 PL VPP:Enable PCIe RefClk Always regardless of drive presence for Non-UBM enclosures
DCSG01963258 96xx: Populate extended status data fields when DCMD fails for MR8_DCMD_STAT_INVALID_PARAMETER error
DCSG01970469 Add support in the Micro Offload Quarterly BST where it can work with No EPAK present
DCSG01936191 System boot and HB download takes over an hour with forced Fault App
DCSG01933297 Write cache protected RDE alert is not logged
DCSG02004513 SPDM : Hardware OID is incorrect - spdm library changes
DCSG01936932 ASSERT: File gen4fw\raid\src\raidErrorMgmt.c line 5356 Fault Code 0x88e3 SSys 0x17 Data Unhandled backend error!
DCSG01946698 9xxx_OOB: I2C bus signal integrity issue during repeated start condition at 100khz speed
DCSG01952930 Remove OEM product entries aligning with the default value
DCSG01983166 Out-of-bounds read in debug functionality of persistent module pairing routine.
DCSG02000179 H965e Enclosure state changes to Faulty after enclosure reset and then hundreds of Unstable and 6/04/1 AEN generated
DCSG02001753 Firmware running out of SAS Mids which leads to 0xf000 fault
DCSG01952924 NVMe host identify cmd enhancements - Mandatory CNS support
DCSG01942364 Review SPDM BST coverage against customer defects and add wolf library support
DCSG01936129 fixed the read until string for uart log collection
DCSG01938159 PLDM firmware update changes as part of the failing a downgrade restriction
DCSG02009777 Negotiated speed and Capable speed for 24G SAS drive is not correct in RDE
DCSG01941107 Series 97xx:  Snapdump created but then erased after 0x8821 fault
DCSG01933244 Implement Redfish Volume Transformation (POST/PATCH)
DCSG02004474 "StateChangeCount" in controller metrics is not incremented after uncorrectableECCerrorcount is detected
DCSG02002271 Enclosure is not discovered while performing Phy off/on in a loop
DCSG01925672 [9700 series] Cleanup interrupt driven errors during FLR
DCSG01948046 Inline hashing - internal io state machine corner cases
DCSG02011728 Remove large stack variables and move to the heap
DCSG01988930 97xx: Download SPDM Measurements function is failing in customer tool, despite Support for Measurements being enabled
DCSG01970352 Additional updates to step build number and firmware versions in multiple streams
DCSG01940568 "Cache offload failed" message reported during pinned cache test case
DCSG01934174 Fault 0x0000003b encountered during flashing of firmware
DCSG01984299 Enable support for the Enclosure with MR8 controller- H965e
DCSG01976840 Concise Evidence Backward Compatibility check with spdmiSpec structure change
DCSG01967273 97xx SPDM:Wrong API is used to get the SM SPDM pool info
DCSG01960502 Support MODE SELECT commands to unconfigured good drives
DCSG01952205 Volume schema shows "AllowablePattern" and "AllowableValues" for "DisplayName" and "WriteCachePolicy" respectively for offline volume
DCSG01957102 Controller serial number mismatch observed across REST client and channel applications
DCSG01958001 Allow for certain NVMe Host i/f features to be per IOC vs global to controller
DCSG01939232 genFwPkg.py --signpq --keyCQID option "Unable to embed key into image"
DCSG01949446 Series 9600+: Update Board Power Values
DCSG01966948 PEA: Uninitialized variable in PDI page access information
DCSG01948028 SPDM: Remove Critical Data Exchange Interface with Generic Platform-Specific Abstract Data Exchange - firmware changes
DCSG01956946 Release Order automation
DCSG01895231 SMM: Enhance Debug with unique fault codes and dumping SMM Func Struct
DCSG01948552 Volume resource doesn't display all allowable values of WriteCachePolicy schema property
DCSG01956383 97xx: compile out NVMe EEDP support
DCSG01903175 Uneven bandwidth distribution on NVMe drives when it reaches the max bandwidth of the host PCIe interface
DCSG01987734 Firmware fault in FLR test
DCSG01976784 PLDM firmware update failed due to PCIe Vendor Defined Message EID's are not assigned on the storage controller
DCSG01971442 Shutdown interface, timing, and coordination issues
DCSG01967032 spdm lib: Add routine that returns measurement hash size
DCSG01937509 Firmware fault when getting package manifest data
DCSG01983424 eHBA Snapdump getting cleared from flash after system reboot but ID not reset
DCSG01933483 Host Admin Reply Message Frame Queueing - Review Defects
DCSG01963572 Controller faults with Fault Code 0x821e
DCSG01928537 Allow function auto assign policy in feature HBA mode
DCSG01941938 Updates to the SecureBoot manifest support
DCSG02018645 97xx:  NVCache Degraded event observed while performing firmware upgrade and downgrade
DCSG01951840 RAID 1E Medium Error Physical drive number calculation
DCSG01999464 Recursive fault 620 observed while running Phy breaks + FLR test
DCSG01983334 Cache Offload Nightly BST failure
DCSG02012422 Arbitrary firmware image size value used in platform measurement when reading data
DCSG01943034 Virtual machine reboot causes function missing from utils
DCSG01969169 To update the sensor state type definition to be in alignment with the specification
DCSG01933052 97xx : Improvements to handle 'out of NAND resources' scenarios
DCSG02019316 97xx : SPDM : On a fresh boot, after attestation the command "getmeas 0xff 0" is timing out in PCIE mode.
DCSG01902420 Add support for 2 outstanding CCI commands per transport interface
DCSG01945087 Fault Code 0x88dd
DCSG01934593 CNSA 2.0 - Wolf library settings and customization to support SPDM CNSA2.0 provisioning
DCSG01948150 IOC Log information string for pending SID ownership changes seems incorrect
DCSG01943478 NVMe host identify command completion status is not updated correctly
DCSG01992808 Fix integration build issue of SPDM library for peer controllers
DCSG01980336 [9700 series] Buffered Read Partial Hit diverted from cache scan due to multi-strip read encountering lock should be resubmitted as buffered read
DCSG01970228 Firmware faults with 0x8B90 in performance IT personality
DCSG01937442 Deliver MPI 3.00.37.1 changes over prior release
DCSG01970628 Firmware faulted with FAULT: F000 and Diag Fault Reason Code: Dw0:10000006 Dw1:00000000 while disassociating secure jbod from PF0
DCSG01984777 Fault 0xF000 with Reason Code 23 observed during IO, Task Management and FLR test
DCSG01981490 Firmware fault during task management
DCSG01954266 SPILIB2: Add Netsol S3A1004R0M support
DCSG01944057 updated psoc6 BGA part number
DCSG01963244 Update log to print correct vendor ID as per the request
DCSG01963692 Firmware image built with SVN 65 fails validation
DCSG02012423 Third party software audit provider - Missing Deallocation of MPI in SPDM ECC Sign
DCSG01949800 Boot time drive insertion RDE alerts are logged
DCSG01956812 Micro write journal module keeps of retrying bad block error forever during command block handling
DCSG01942149 CTRL PROP diskCachePolicy is marked as modifiable
DCSG02003884 During a SATA drive hotplug test, SATA HDD cannot be discovered randomly
DCSG01944720 Enable CDU marker request timer and timeout abort logic
DCSG01945675 Add clearing parametric data to the cache offload BST
DCSG01946608 Assert hit during the task management and medium error recovery
DCSG02020584 Controller fault observed after performing the firmware downgrade to the latest PR2 build
DCSG01942993 Firmware: Displaying complete Controller properties in storcli2
DCSG01995264 NULL characters observed in SnapDump TTY log
DCSG01933500 DO not create identity during host boot recovery
DCSG01978266 [9700 series] Buffered read partial hit overwrite pure lock region lock request callback resulting in stale locked cache segment entries on reserved logical drive
DCSG01958267 SPDM ECDSA keypair parsing error causing wrong certificate chain request entry
DCSG01910569 Drive metrics RDE Changes
DCSG01999435 F000 fault observed while deleting Virtual Drive
DCSG01983947 Annotation for 'Encrypted' schema property of volume resource is displayed in REST client when the volume is secure capable
DCSG01934601 CNSA 2.0 - SMM: ML-DSA provisioning support
DCSG01926494 Hit Faultcode 265D During I/O & task management & Snapdump Ondemand on NVME JBODs
DCSG01956191 Hitting fault 0x265d when SID Credential Management is set to firmware taking affect and enclosure power off during Ctrl reset
DCSG01992715 SPDM Add support for raw platform measurements
DCSG01946310 FAULT 8210 Task Management Timed Out while running IO and locate command
DCSG01958702 Series 9600+: Update SPI1 CS1 entries
DCSG01960106 In master.xsd, the ISTWIControllerInfo 3-10 have different BusSpeeds
DCSG01970272 PL fault with push/pull
DCSG01969117 Fix IOU Page 14 related prints during non-ReadOnly config page intialization
DCSG01928501 Adjust TTY debug masks of some of the modules
DCSG01969386 NVData FLAG Field mismatch in Manpage 42 (RaidFlags00:bit_11) - TempPollDisable and TemperaturePollEnable
DCSG02000424 FAULT: 265D when attempting to format a JBOD mapped to Windows VM
DCSG01970435 Implement energy pack composite sensor
DCSG01984572 PL: Add a control request to identify Trombone Enclosure
DCSG01957206 CNSA 2.0 - Add Certificate Signing Request attributes (Subject Alt Name, EKU)
DCSG01942035 Fault 0x8463 seen during firmware download when the IOC is in Host controlled boot mode
DCSG01930245 Mark JBOD/Unconfigured drive with SID credential management ownership taken by Firmware as unusable when feature is disabled on controller
DCSG02008893 Firmware fault during drive insertion
DCSG01946442 Removed duplicate Backup energy Management ringbuffer data printing upon snapdump generation
DCSG01944737 Assertion failure in ..\..\src\dmRecovery.c line 5472 fault code  0x820d Data Cannot Abort, Invalid SM state
DCSG01968628 HDD fields are listed for 9760 products raid mode
DCSG01958021 SPDM ECDSA keypair parsing error causing wrong certificate chain request entry
DCSG01920824 modify code to reset the Logic drive Perst table for Power Cycle / System reboot when there is no dirty data. For Soft Reset, keep the mapping as is
DCSG01941726 SPDM Lib: Implement APIs to Validate Peer Cert Chains and Signatures
DCSG01928842 Handle the value 0x3 for EEDP feature
DCSG01937293 Controller fault observed while performing the drive firmware update from a host application
DCSG01979907 97xx: Download SPDM Measurements function is failing in customer tool, despite Support for Measurements being enabled
DCSG01939146 96xx_OOB:Firmware faults when PCIeVDM binding is disabled through nvdata
DCSG01948851 Changes are doen to dump some extra debug information in SnapDump
DCSG01973089 I2C clock stretch timeout values set incorrectly
DCSG01945523 Inconsistent parity reported in Step 8 of TR
DCSG01951970 IPMI BST support
DCSG01926987 Series 9600+: Add failover logic for redundant images during boot
DCSG01935231 Enable write cache for sata hdd during rebuild
DCSG01958563 Firmware is populating incorrect media error count for JBODs
DCSG01972957 Update the Redfish Code with missing code changes
DCSG01983541 [9700 series] Firmware fault during logical drive task management prematurely completing before diverted backend IOs of host IOs are released
DCSG01940264 9xxx_ooblib:TimerId is not being invalidated immediately when the update timer expires
DCSG01949405 [9700 series] NVMe Host IO Retry with PRP list or SGE chain
DCSG01960105 Possible out-of-bounds read found by static code analysis tool
DCSG02019834 97xx : SPDM : On a fresh boot, after attestation the command "getmeas 0xff 0" is timing out in PCIE mode.
DCSG01974171 NVMe: Test Unit Ready commands unexpectedly fail with certain NVMe drives
DCSG01945123 Enable StorageControllerMetrics and PortMetrics features
DCSG01972403 Child Task Management not skipping hostQ cleanup
DCSG01957918 After expected F006 fault, pl show dbg gets stuck
DCSG01990918 Incorrect device id is passed to fetch the physical device related info.
DCSG01926450 97xx NVMe Host IF : Implement new DCMD to return Persistent ID to Host NSID mapping
DCSG01964378 Series 9600+: BSP verification status overwritten
DCSG01983874 Cache Offload Nightly BST failure
DCSG01965734 Online capacity expansion foreign drives shall be grouped under the 'Non-Importable' drives section in applications
DCSG01916126 Firmware hit Fault F000 while running IO and task management
DCSG01961893 Difference in behavior in "firstdeviceid" feature when compared to 96xx and 97xx boards
DCSG01957268 Series 97xx: Runtime Snapdump interferes with previous Snapdump
DCSG01987933 Correction to the energy pack temperature sensor thresholds reported to the management controller
DCSG01932556 97xx : Add new PSoC6 support for the ESM Form Factor board
DCSG01933461 Mapped JBODs when inserted back, become bad.
DCSG01939276 FMC Alias Key incorrectly used unsupported HMAC
DCSG01928457 NVMe: consideration for drives that need a bit more recovery time
DCSG01979313 9600x : SPDM : Observing wrong output with "show security spdm" command.
DCSG01960282 After Volume rebuild failure, RebuildErrorCount value remains unchanged under Redfish Volume Metrics
DCSG01999484 Hardware MFGOTP structure is incorrect.
DCSG02004413 [9700 series] Delete Logical drive DCMD timeout results in diag fault reset
DCSG01872405 CNS00 and CNS 01 pages updated
DCSG01964604 Temperature sensor command and display additions
DCSG01962049 SPILIB2: Update Chip Select Parameters
DCSG01935342 Fault 0x265D seen during IOs and exceptions with FLR
DCSG01952785 NVMe: revert LogInformationAvailable behavior for NVMe encapsulated ForceAdminErrorReply
DCSG01935313 Update PLDM header tool to support SecureBoot Manifest
DCSG01971570 Hit F000 fault during task management commands and rebuild in progress
DCSG01928493 Multifunction related changes
DCSG01937160 96xx_ooblib: Static code analysis defect in PLDM firmware update module.
DCSG01971473 Add StringTable.bin to the firmware build
DCSG01962032 CNSA 2.0 - SPDM: Validate incoming certificate chains using ML-DSA keys
DCSG01983662 Fix static code analysis issue 1781004 and 1781006
DCSG01942741 Consolidate Error code and remove unused code
DCSG01931149 Missing functions during virtual machine power ON
DCSG01948337 Fault 0x265D observed during firmware update
DCSG01958284 micro journal property gets disabled incorrectly after copy back
DCSG01948519 97xx: Fixed testJ_BemI2cSoftResetTest keeping the driver unloaded on the BST system after test execution
DCSG01980979 Fix some PL debug prints.
DCSG01983335 Redfish header(head) allowed methods does not match with get allowed methods
DCSG01933847 PEA: Platform specific changes to calculate settings for Buffer Read Enable
DCSG01872408 NVMe Host : Review and fix the NVMe Capabilities value for IO Controllers
DCSG02010481 SPDM - X509 Extension non-critical section for hardware id needs to be DER format.
DCSG01946004 Introduce new field to indicate data band is unlocked during phy disable/enable
DCSG01952207 The controller properties are actually not changed, but the event is logged.
DCSG01946343 IRP-22041: Redfish Port.Metrics schema returned 404 Not found
DCSG01933611 Update BSP board config JSONfile to include Feature HBA NVDATA for the FPGA
DCSG01967137 Compilation failed on setting compile time #define NVME_HOSTINTF_SUPPORT 0
DCSG01948414 Battery device chemistry is showing under MFGname
DCSG01957126 Firmware faults with write journal count 0 during foreign import
DCSG01933898 Fix for MCTP Network Info allocation failed
DCSG01980203 SPDM : When HANDSHAKE_IN_THE_CLEAR_CAP is set to zero secure session is failing.
DCSG01954766 Develop Interafaces to issue NVMe Cmds to backend drive when host side is NVMe
DCSG01983442 0xF000 RC 5 while running back to back locate LED on  JBOFs
DCSG01963644 Firmware hangs indefinitely when importing and destaging cache on a write through virtual drive
DCSG02004512 SPDM : Update main firmware with the latest SPDM library tag
DCSG01944579 Remove non-GCA 97xx boards from release order package
DCSG02002274 97xx : SPDM : Observing successful message even when Attestation failed.
DCSG01952920 Automate the version update and build process for controller firmware.
DCSG01923690 Add support for two NVMe Host Interface controllers.
DCSG01992063 Kill adapter while issuing LED Locate
DCSG01933552 Fix pel debug argument validation checks
DCSG01944193 PEX90000 SystemC (ooblib): Fabric Crawl out - Follow up tasks
DCSG01981031 0xEE10 fault while running IO and enclosure power cycle on the JBOFs
DCSG01933048 97xx : Code Cleanup
DCSG01957442 Security Key identifier is shown with junk characters in REST client
DCSG02000964 Cache Offload Nightly BST failure
DCSG01926059 [9700 series] Firmware fault with medium errors, IO and task management
DCSG01980199 Fault : 8b32
DCSG01984405 [9700 series] Hardware out of TRC credits due to Receive Queue buffers being exhausted
DCSG01939915 Drives removed in firmware absence and during boot up the virtual drive is offline consistency bit is not cleared
DCSG01984612 modify the nvdata for 97xx perf mode to disable the failonsmarterror for adv host drive
DCSG01943460 Series 97xx: Static code analysis issue in Device manager module
DCSG01943390 Mini Controller internal module is busy
DCSG01998848 Series 9600+: Abort routine is not checking for NULL
DCSG01980091 fix print statements in SPDM
DCSG01964412 Implement setting of the supportLockKeyApplyThrottle  support bits appropriately in the firmware
DCSG02017632 The SMM FuncCode 0x900 warning was observed when the getmeas command was issued. The execution took 290 ms, which exceeded the allowed threshold of 100 ms.
DCSG01941228 Physical Drive background operation progress set event string update
DCSG01964587 Remove Cache Offload APIs used by UART IOP commands for displaying the Persistent RB and TTY
DCSG01937338 Fixed compilation error
DCSG01957514 Series 9700+: Provide revision checking mechanism for ETP debug data
DCSG01935193 97xx series, user cannot create a file system on virtual drives mapped to NVME host
DCSG01934393 Removed call to OOB shim from OOB library
DCSG01987118 SPDM Lib: APIs to peer firmware : Root Public Key Validation Fixes: Skip Private Key and Z-Value Checks
DCSG02000863 Firmware Fault 0xf000 Upon Pulling the Physical Drives when IOs are in place on multiple Virtual Drives
DCSG01930153 Ability to obtain drive temperature in OOB using cached information via config request for Perf eHBA
DCSG01996541 Handle the device state transitions for initialization SM failures
DCSG01968950 [9700 series] Logical drive task management skips walking region lock reserved cache segment pendlist
DCSG01939708 Redfish Battery: PLDM Type 2 Library application module Spec changes
DCSG01965020 StorMQ Win2025: Firmware resets due to command timeout while formatting 1drive R0
DCSG01935147 MegaRaid Firmware : Security Audit Improvements
DCSG01944050 Micro Write Journal RAID1/E Degraded Copyback Case Handling
DCSG01933063 Firmware assertion due to command block pending for >70 seconds
DCSG01943398 Update number of PFs Supported
DCSG01942446 ASSERT Data PL internal Nvme Encapsulated lmid received in divert handler
DCSG01964900 97xx: Categorize cache offload BST test cases
DCSG02015816 The subject name data is not populated in the certificate signing request in some cases.
DCSG01979951 97xx : After upgrading to 8.16 StorCLI on BST server, BST fails
DCSG01316858 Integrate Non Volatile Memory Express Host Layer with Device Module
DCSG01901869 Optimized Memory for Redfish Read operations
DCSG01948006 Fix excluded image check in load address validation routine and remove an unsupported region for acceptable load address region list
DCSG02010281 Make SignCompImage replace hash extended images before signing
DCSG01941348 97xx Snapdump: improve timestamp handling in Snapdump
DCSG01975453 To fix the compilation failure in cases where firmware is compiled with drive metrics feature disabled
DCSG02013295 FMC Device Keys are not deterministic between builds
DCSG01938278 97xx: Snapdump generated during boot has wrong timestamp
DCSG02002437 Micro Offload Table Properties is not updated after draining the EPAK
DCSG01981584 SPDM Block the security module at a higher level when SPDM is disabled via NVDATA.
DCSG01948409 Minimum allowable capacity bytes of the volume is not aligned to the strip size boundary
DCSG01969385 Frmware activation fails validating secondary FMC image going from DI to CDI firmware
DCSG01939266 Controller profile ID changes to 1 with 15 IOCs after Firmware upgrade
DCSG01936981 CNSA 2.0 - SPDM: Request and process ML-DSA key pair from SMM in addition to ECDSA key pair

UEFI BSD DRIVER
DCSG01933590 Compare Broadcom NVMe NSPF driver with native NVMe driver
DCSG01933584 Add NVMe Non Supervisor support Device ID
DCSG01942757 UEFI BSD: Rebase to latest MPI release and validate the BSD code
DCSG01933588 Don't Install protocols which are not required for NVMe Host

UEFI HII DRIVER
DCSG01984302 UEFI HII: Increase the Maximum Enclosure Buffer Size from 1024 bytes to 4096 bytes to read the Enclosure Diagnostic Pages
DCSG01964632 UEFI HII: Build error due to undefined struct member
DCSG01941067 UEFI HII: New board support in pre boot.
DCSG02004430 Selecting "Supervisor or WRR" as an option for the "Auto-Assign Policy Execute Once" results in a critical error message.
DCSG01942758 UEFI HII: Rebase to latest MPI release and validate the HII code
DCSG01942995 UEFI HII: Add a new field in Advanced Controller Properties to show the Spin Down Time
DCSG01977373 UEFI HII: Invalid arguments error is seen while updating Rebuild Operating Mode Priority in HII
DCSG01970443 Displaying the Drive count from HII when controller firmware is not populating it
DCSG01949206 Legacy enclosure mode support
DCSG01942189 UEFI HII: Static code analysis tool detected defect fix
DCSG01969483 HII to implement the Enhanced string on HII prereview configuration for the foreign import.
DCSG01986628 Controller Status shows need attention when controller is in healthy state
DCSG01861465 Preboot_Utils: address API, firmware and Tools usage of drive list query
DCSG01989060 UEFI HII: The controller status will be shown as critical if at least one offline physical device or a non optimal logical device is present.
DCSG01978896 UEFI HII: Converting non raid Physical Disk to RAID capable fails
DCSG01948412 Battery device chemistry is showing under MFGname
DCSG01935150 Preboot_Utils: MR8: Security Audit Improvements
DCSG01984573 UEFI HII: HII support for new enclosure support on HBA465e
DCSG01993023 Failure to Expand Virtual Drive in HI

VISON FW
DCSG01876032 97xx PSoC: Fix SnapDump not emptying, leaving PBLEP asserted
DCSG01895071 97xx PSoC: Outstanding log count rolling over
DCSG02000888 96xx PSoC: PSoC5 Project configuration change for build scripting.  No functional change.
DCSG01898986 97xx PSoC: Roll Revision to 04.03
DCSG02001938 96xx PSOC5: resolved dev test tool bugs group2
DCSG01994619 96xx Vision : Remove any PSoC6 rom files from the 96xx Vision release
DCSG01876529 97xx PSoC: Roll Revision to 04.00
DCSG01908845 97xx PSoC: Revert BemInfo to v1
DCSG01883238 97xx PSoC: Persistent Data for Task Schedules returning incorrect data
DCSG01908966 97xx PSoC: Standardize to Hardware/Firmware version printing xx.yy
DCSG01878084 97xx PSoC: App2 fails to boot
DCSG01878889 97xx PSoC: Roll Revision to 04.01
DCSG02008427 Add PSoC4 HBA to project folder for 96xx
DCSG01871127 97xx PSoC: Enhance epak charger logic and support DVT FBU33
DCSG02001937 96xx PSOC5: resolved dev test tool bugs group1
DCSG01932555 97xx Vision: Add new PSoC6 build type for the ESM Form Factor
DCSG01876020 Change Record Length in SnapDump Log Transaction
DCSG01820524 96xx Vision : Remove PSoC6 from any 96xx Vision release and correct the PSoC chip types in the build
DCSG01992788 96xx PSoC: Add PSoC5 Project
DCSG01902517 97xx PSoC: SnapDump Decoder Integration
DCSG01993434 96xx PSoC: Configuration Management Support, no functional change
DCSG02002030 96xx : add PSoC6 BGA build back into Vision release
DCSG01879477 96xx PSoC: Create New project
DCSG01923539 97xx PSoC: Support 9700-16e
DCSG02011597 96xx PSOC4 Code Analysis fixes (1782825, 1782826, and 1782827)
DCSG01849247 96xx Vision: Add new PSoC4 build type for 9602W-16e (see PR DCSG01458718)
DCSG02004991 96xx PSoC5:  Roll Revision to v29
DCSG01895072 97xx PSoC: Support FBU33 EVT cfg2
DCSG01904312 96xx PSoC6: Assert BemAttn on FC deassertion
DCSG01919694 97xx PSoC: Include ESM Build target and roll revision to 04.04
DCSG02001939 96xx PSOC5: Fix code analysis issues group 3
DCSG01867477 96xx Vision: Change PSoC4 rom file names to include 'psoc4'
DCSG02004369 Fixed missed CID 1782307
DCSG02010870 Add HBA build automation support
DCSG02009910 96xx: PSoC6 Roll Revision to v02
DCSG01868859 96xx VISION : Revert the OCP board type change on 9602W-16e board
DCSG01941913 96xx PSoC6: Release v01.00
DCSG01886223 97xx PSoC: Roll Revision to 04.02

FW BUILD TOOLS
DCSG01841839 Series 96xx, 97xx Build process:  add copyright support for hwheaders in the linter
DCSG01486253 Add a pre-commit checking tool
DCSG01978346 Series 96xx, 97xx Build process: copyright is not being updated in some files
DCSG01803997 Series 9700: add more print functions to the checker
DCSG01488652 Updates for precommitTool.py
DCSG01490876 Updates to fix copyrights during checkin
DCSG01935313 Update PLDM header tool to support SecureBoot Manifest
DCSG01745783 Linter needs to ignore directories
DCSG01814282 Series 97xx: add assert/fault functions to the print checker -- fwbldtools
DCSG01882746 Add the precommit script for the shim file builder to the utilities
DCSG01843915 Series 96xx, 97xx Build process: add a rule for unicode in the linter
DCSG01979435 Add a rule to remove trailing whitespace from Ring Buffer/Trace Buffer format strings in the Linter
DCSG01973119 PLDM_header_tool:Incorrect offset for component image information in the PLDM header with multiple distinct SSIDs
DCSG01708591 Series 96xx, 97xx Build process: Support the linter on Python3
DCSG01555387 Modify sbrimage to allow PSW settings to be part of the SocSbr
DCSG01943386 genMPB.py does not compute the checksum correctly in all cases.
DCSG01849611 Series 97xx: assert audit for 8.14
DCSG01817872 Series 97xx: add Fault Code to the assert audit differences tool
DCSG01798430 Add Python script to generate binary MPB files
